Radiator Guard for Royal Enfield Continental GT 650 | Interceptor 650

: 3,300 (You Save 375)
2,925 Including GST

Motofusion radiator guard is designed to protect radiator of the motorcycle from debris, gravel, pebbles, rocks, and insects from hitting the radiator fins and damaging it. Damaged radiator can affect bikes cooling system which can bring your commute, touring or trackday to a premature end or leave you stranded on the roadside.
【Material】 Manufactured from premium quality stainless steel sheet, extremely robust and durable especially under offroad scenerios because of the high density of steel compared to aluminium guards.
【Feature】 Stainless steel being corrosion resistant offers long and worry free ownership experience especially if the motorcycle is used on the harsh terrain consisting of offroad, dirt, muck, wet or rocky roads.
【Feature】 Custome cutout design maintains the optimum airflow thereby protecting the radiator fins from stone chip damage and not overheating the coolent at the same time. Brushed steel finish gives it a premium look.
【Fitment】 Designed for Royal Enfield Continental GT 650 & Interceptor 650 . Year 2018 2019 2020 2021 2022. Easy installation. Hardware included.

Description

Motofusion Radiator Guard (also known as Fin Protector, Fin Cover, Radiator Cover etc) is a means to extend the life of the radiator by preventing damage to the fins and helping in maintaining the high efficiency of the engine. They are a must, if you love to drive off-road or you regularly commute on a road which usually has pebbles and other debris.

In normal circumstances, stones and other debris are thrown towards the radiator by the front tyre and by other vehicles passing nearby. These debris bends the fins and causes damage to the radiator. A radiator with bent fins has a lower efficiency than a brand new one. This leads to decrease in the efficiency with which engine is cooled. It could be dangerous to ride the bike in this condition and replacing these parts is expensive, in case of sport bikes. Fitting the bike with Motofusion Radiator Guard results in reducing these costs. Hence, these are meant to be cost effective way of keeping your bike in good condition.

The Weld-less design makes it look stylish, while providing optimum protection to the radiator.

Fitted directly over the radiator, they prevent the stones and debris from hitting the radiator and damaging its fins. Sandwiched between the outer structure is the mesh, that has a net approximate air flow rate of 70%, thus providing an optimum balance between air flow and protection.

The Motofusion Radiator Guard is made from single sheet of stainless steel. Bolts are made up of Stainless Steel, to provide a rust proof experience.

The full product is made via a combination of various processes, including computer guided machining, to make sure all products are identical. The computer based machining makes sure the product is made within a narrow tolerance and is made as intended by the designers.

Fitting the Motofusion Radiator Guard is very easy. It only takes basic tools to Install it.

 

COLOURS:

Motofusion Radiator Guard is available in Brushed Stainless Steel finish.

 

SHIPPING:

There is Free Shipping with Motofusion Radiator Guard, all over India, when bought through http://motofusion.in

 

COMPATIBILITY:

It fits the following bikes, which are sold in India:

  • Royal Enfield Continental GT 650
  • Royal Enfield Interceptor 650

 

INCLUDED IN THE PACKAGE:

  • Motofusion Radiator Guard (1 No)
  • Stainless Steel Fastners
  • Foam Strip (To avoid Vibration Noise)

 

NOTES:

  • The radiator guard protects best against large and medium size stones and other debris. Protecting against tiny sized stones and other debris would require a smaller mesh, which in turn will reduce the efficiency of the radiator. Hence, Motofusion Radiator Guard has net approx. 70% air flow for optimum protection and efficiency.

 

Additional information

Weight 0.499 kg
Dimensions 32 × 25 × 6 cm
Motorcycle

,

Material

Delivery Time

All Orders are shipped via leading courier companies (FedEx, DTDC etc) via Air Ship Method (wherever available) (except for orders containing Paddock Stand)

Processing Time:
In Stock Items:  1-3 working days
Backorders: 7-15 working days (Or as stated)

Delivery Time(After Product is Shipped):
Metros: 1-4 working days.
J&K and North East: 5-14 working days.
Others: 2-8 working days.

Notes:
1. These are expected delivery times, and it may take longer, due to any issue at the courier company’s end.
2. If your address is not serviced via FedEx and DTDC, it will be shipped via India Post Speed Post. If however, that is also not possible, you will be asked to give another address or your order will be refunded.