Description
Motofusion Swingarm Sliders for KTM Duke RC (also known as Rear Axle Sliders, Rear Axle Protectors, Rear Bobbins etc) are a means to reduce the damage to the swingarm, brake caliper, wheel rim, rear axle and axle nut in the event of a fall.
In normal circumstances, even a simple bump to the side of the rear wheel damages the swingarm and sometimes, even damages the rear brake calipers. It could be dangerous to ride the bike in this condition and replacing these parts is expensive, in case of sport bikes. Fitting the bike with Motofusion Swingarm Sliders results in reducing these costs. Hence, these are meant to be cost effective way of keeping your bike in good condition.
These are designed to look stylish, while providing optimum protection to the bike.
Fitted directly at the outside of the swingarm of the bike, they absorb part of the crash force and then dissipate the impact force.
The ends of the Motofusion Swingarm Sliders are made up of Black Delrin, which has the added advantage of being highly abrasive. Thus, if you fall down while riding, it sacrifices itself to some extent and absorbs some crash energy. Bolts are made up of Stainless Steel, to provide a rust proof experience.
The full product is made via a combination of various processes, including computer guided machining (VMC, CNC etc.), to make sure all products are identical. The computer based machining makes sure the product is made within a narrow tolerance and is made as intended by the designers.
Fitting the Motofusion Swingarm Sliders is so easy, that even a novice can do it, using basic tools.
For best protection, also buy Motofusion Frame Sliders and Motofusion Fork Sliders. Also available, at a discounted price, is the FULL KIT.
COLOURS:
We only use Black colour polymer to provide a consistent and lasting quality.
SHIPPING:
There is Free Shipping with Motofusion Swingarm Sliders, all over India, when bought through http://motofusion.in
COMPATIBILITY:
It fits the all the variants of KTM 125 200 250 390 Duke RC bikes sold in India
INCLUDED IN THE PACKAGE:
- Motofusion Swingarm Sliders x 2
- SS Bolts x 2
- Washers x 2
NOTES:
- Rear Tire Hugger has to be removed to fit Motofusion Swingarm Sliders, otherwise it will not be able to dissipate the force properly, due to small cross-sectional area of the tube of the rear hugger.
- The load from the crash is absorbed by the Swingarm Sliders to some extent and then passed to the strong part of the bike, for dissipation of the crash force, thus minimizing the damage caused. However, even the swingarm is designed by the bike manufacturer to take certain maximum load. Hence, depending on the manner of the fall/crash, no brand’s, including Motofusion’s Swingarm Slider can prevent 100% of the damage.
